A student measured the diameter of a small steel ball using a screw gauge of least count…NEET 2018 · Physics · Units and Measurements
By the RankUp team, founded by Dr. Deepak Sahu (MBBS Gold Medalist, NEET PG AIR 1731) · Updated
A real question from the NEET 2018 paper, conducted by CBSE. Pick an option to check your answer, then read why it is right.
- Exam
- NEET 2018
- Subject
- Physics
- Chapter
- Units and Measurements
- NCERT
- Class 11
1 questions. Tap an option to check your answer.
Q37NEET 2018 · Q37
A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular scale division coincides with 25 divisions above the reference level. If screw gauge has a zero error of −0.004 cm, the correct diameter of the ball is
Not quite — the answer is D.
Observed reading = 0.5 cm + 25 × 0.001 cm = 0.525 cm. Correct reading = observed − zero error = 0.525 − (−0.004) = 0.529 cm. Adding the negative zero error with the wrong sign gives 0.521 cm.
More PYQs on Units and Measurements
43 past NEET and AIPMT questions on this chapter. See all, with a free PDF →
- Consider that σₛ, k_B, b represents Stefan-Boltzmann constant, Boltzmann constant and Wien's displacement law…NEET 2026 Re-exam
- The speed of light in vacuum is taken as unity. If light takes 6 min 40 s to reach the Earth from the Sun, the…NEET 2026 (3 May, cancelled)
- Each side of a metallic cube of mass 5.580 kg is measured to the 9.0 cm. Keeping the significant figures in view, the…NEET 2026 (3 May, cancelled)
- In a vernier calliper, 20 VSD coincide with 16 MSD (each division of length 1 mm). The least count of the vernier…NEET 2026 (3 May, cancelled)
- A physical quantity P is related to four observations a, b, c and d as follows:NEET 2025
- Consider the diameter of a spherical object being measured with the help of a Vernier callipers. Suppose its 10…NEET 2025
- In an electrical circuit, the voltage is measured as V = (200 ± 4) volt and the current is measured as I = (20 ± 0.2)…NEET 2024 Re-exam
- The pitch of an error free screw gauge is 1 mm and there are 100 divisions on the circular scale. While measuring the…NEET 2024 Re-exam
